The outdoor gantry crane, when it is shipped out of the manufacturer workshop, begins to enter the wear stage. This process is relatively slow, and the appearance oxidation is the easiest to pay attention to. Therefore, workers should always maintain the anti-corrosion of these outdoor gantry cranes and remove dust from the exterior. When it is rainy, can spray an oil film on the surface to isolate the humid air.
The following locations should set up conductive sliding line shields:
1. When the driver's cab is located at the end of the trolley's sliding line, a protective plate shall be set up between the ladder, walking platform and the sliding contact line;
2. Under the end beam of outdoor gantry crane, shall set a protective plate to prevent accidental contact between the spreader or the wire rope and the sliding wire;
3. The position which are prone to electric shock shoule set conductive sliding line protection plates;
4. When the outdoor gantry crane is arranged in multiple layers, the sliding line should be set up a protective plate.
Related news
- Industrial gantry crane hook choose
- 50 ton Double Hooks Girder Gantry Crane Spe
- Mobile gantry crane cable installation
- Outdoor gantry crane static power
- Gantry Cranes Traveling Mechanisms Inspecti
- Mobile gantry crane control device
- Mobile gantry crane wheels
- single girder gantry crane deliver to Austr
- BMH electric hoist semi gantry crane
- Box shape girder gantry crane